Ghost II Immobiliser
Protect your vehicle from key-cloning, hacking, and car theft. It's completely silent and undetectable to a would-be thief because it doesn't use LED indicators or key fob tags to signal that it's there.
ghost car immobiliser can be temporarily disabled in certain situations like transport of vehicles or when your car is being repaired.
Simple process to change the PIN code
Ghost is a revolutionary next generation security device that will secure your vehicle without cutting wires, or adding aftermarket alarm keys for immobilisers. It connects directly with the vehicle's CAN Data Network. A personalised PIN code can be programmed using the factory buttons located on the dashboard and the steering wheel. This code will stop the engine from starting and is not detected by any RF scanning technology or code-grabbing technologies used today.
The system has an emergency pin code override in the event that the user forgets their pin code or a programming key is lost. It also has a Service/Valet Mode that allows the vehicle to be started temporarily and driven without the need for an active code, making it ideal for transportation or servicing.
While the UK automotive aftermarket is flourishing however, it's not invincible to theft. The OBD port in your vehicle could be hacked by thieves to avoid traditional deterrents such as locking your steering wheel and wheels. This can be accomplished with an laptop, a USB cable, and an inexpensive OBD scanner that can be purchased on the internet for less than PS50.
In order to avoid theft, it is essential to take steps to protect your vehicle with an immobiliser ghost II. It's a small device that can help prevent vehicle theft. Once you have your PIN code it's easy to use. The device is housed in a small, compact box that can be connected to the wiring harness of your vehicle. It can be placed anywhere on your vehicle and is weatherproof. This makes it hard for thieves to find. The device is also easy to install and is with a money-back guarantee.
Small, weatherproof device
The device is connected to the CAN data network of your vehicle without cutting wires and is completely silent. It can be programmed with a the unique PIN code that is entered using the buttons on the steering wheel as well as the dashboard to stop theft. The device also has an inbuilt GPS tracker. It can be activated via an app on your phone and is recommended by numerous insurance companies for cars. It is weatherproof and can be concealed in the vehicle and is nearly impossible for thieves to locate.
Contrary to traditional systems, which can be heard by criminals, ghost II operates in a quiet manner and requires between 4 and 21 button pressings of the vehicle's buttons. It can be set by the vehicle owner according to their preference, and the sequence cannot be cracked. There is a mobile phone App that can be used to dearm the system, and in the event that you sell your vehicle there is a master reset code that can reset the immobiliser for the CAN bus.
Modern thieves can use diagnostics to detect circuit breaks on modern vehicles, but the Ghost is not equipped with circuit cuts. Our CANbus fitters can install this system in an automobile with confidence.
The Ghost is compatible with any vehicle, in contrast to other CANbus immobilisers which may require a key fob. The technology it uses is so advanced, it can protect from a variety of security threats, including attacks on signal relays and ECU switching. It is compatible with many smartphones and can send notifications to owners when their vehicle is being driven unauthorisedly.
Tested for each vehicle
Ghost is the only immobiliser available on the market that protects your vehicle from key hacking, cloning, and even theft of keys. To steal a Ghost-protected vehicle, the criminal must physically remove the device and transport it to an unattended trailer. It also protects against the use wheel locks or jumper cables, as well as universal keys.
This extremely simple to install system works in a quiet manner and connects to the vehicles CAN data circuit, enabling it to directly communicate with the ECU (Engine Control Unit). It is so small and sealed that it can be installed anywhere within your vehicle.
Once it is installed, it stops the vehicle from starting unless the specific sequence of disarming is entered by pressing the buttons on your vehicles steering wheel, door panels or central console. You can make it up to 20 digits and decide how secure you'd prefer to be. It is also possible to activate a Service/Valet mode which allows you to temporarily start and drive your car without needing to enter your PIN.
It uses an CAN data circuit, which means that there are no radio frequencies, like the traditional immobiliser. This means that a burglar cannot listen to the relay and attempt to figure out the PIN code that is entered. It also doesn't have any circuit breaks and cannot be identified by diagnostic tools or code-grabbing technology or RF scanning.
At Boundary Car Care we have been proud to be approved installers of this wonderful product for quite some time currently and are extremely amazed by how well it performs and the peace of mind it offers our customers. It really is a great solution for protecting your joy and pride in these uncertain times.
Emergency Pin Code override
The Ghost immobiliser is a weatherproof and tamper-proof device that prevents your vehicle from starting if you don't have the correct PIN code entered. It is concealed in your vehicle's wiring harness. It uses buttons on the dashboard or steering wheel to generate an individual code sequence. It's not a Thatcham device, as it does not use LED indicators and is connected to your vehicle via the CAN system. This makes it inaccessible by professional thieves who are able to detect alarm/immobiliser systems within modern vehicles by using readily available diagnostic tools.
By entering an emergency override in the app on your phone will temporarily disable your Ghost immobiliser. This allows you to lend your car to a family member or valet without sharing your pin number and is ideal for situations such as servicing, or when you need to leave your car in valet parking or a garage.
Ghost can be used with the driver fob. This allows you to start your car with your key or via the app. This is ideal for when you wish to give your child the keys to the car, or if you are unable to input the pin number in a quick manner.
With an easy PIN change procedure, an easy-to-use interface, and numerous security features, there's not surprising that the Ghost immobiliser is endorsed by a variety of insurance companies and secured by a warranty. Its sleek, compact design and seamless integration into your vehicle's current systems makes it a vital accessory for high-performance or vintage automobiles.
Service/Valet Mode
The Ghost immobiliser is able to prevent vehicle thefts by blocking communication between the key and the ECU. This means that the engine cannot be started without a PIN number that is unique to the. It's also hidden inside the wiring, allowing it to be hidden from view and doesn't have LED indicators that could indicate its presence. This is ideal if you have to give your car to valet parking or a mechanic. Enter the code supplied by your engineer at the time of installation to activate valet mode. This allows the vehicle to start without the need to enter a disarm sequence. To exit valet, simply return your vehicle to normal operation. The code will change automatically back to your normal pin.
In contrast to other security devices that rely on your vehicle's keys or buttons, Ghost is designed to integrate into your cars CAN bus system. This gives it unrivalled protection against modern theft techniques like key hacking and cloning.
Once installed your engineer will be able to show how to arm, dearm and clean your vehicle. ghost immobiliser and tracker of this can be done through your smartphone app. Your engineer will design an individual pin that is easy to remember, yet mathematically unattainable for thieves. If you forget it do not worry, as every installation comes with a Emergency PIN Code Override to get your vehicle working again.
Our installers are fully qualified and have been trained to ensure that your Ghost is installed correctly. All installations are carried out at the premises of our customers and we offer a demonstration on how to operate the device and mobile application. Once Ghost is installed, we are able to guarantee the performance of the device.